A guide to the success of Polish companies

The implementation by MOL ROMGUM of environmentally friendly technological solutions, including an innovative production process in the field of packaging rubber gaskets.

M.O.L. ROMGUM specializes in the production of rubber gaskets for sewage and water pipes approved for contact with drinking water. The aim of the project is to implement an innovative process of packaging gaskets of BL and DD type with the use of environmentally friendly technological solutions, which will optimise the production, packaging and materials management, improve product quality and del...

Implementation of a process innovation in the form of a platform for qualitative and dimensional classification of wood.

In a wood processing plant, the manipulation of round wood is performed in order to obtain raw material of appropriate lengths, eliminate excessive curvature and remove defects blocking further processing. The process used at the Trans-Wood plant before the project was implemented was not very efficient in terms of quality and energy. Therefore, under the project we introduced a special line for q...

Diversification of production in the GEO-EKO company by implementing an innovative anti-smog window ventilator.

GEO-EKO is a manufacturer, installer and distributor of equipment for ventilation systems. We constantly strive to adapt our offer to the expectations of customers, as well as to improve the health and greening of society. Polish cities are among the most affected by smog in Europe. Under the project, we will develop a ventilation device to purify the air entering the premises from outside, to be ...

Implementation of low-waste and automated welding technology for metal details

Metrol offers services for the production and processing of metal parts. The project responds to the customers' needs regarding the quality of the manufactured parts, and aims to reduce material and energy losses generated in the production process. The manual welding techniques used in our plant are burdened with a lack of repeatability and imprecision of human work, which result in unacceptable ...

Implementing an innovative Granit-Pol production technology and launching the production of a national-level innovation: sound-absorbing granite slabs.

Granit-Pol specialises in the production of tombstones and various granite elements: from granite slabs to furnishings and building stone products. The aim of the project is to implement our own technology of manufacturing decorative sound-absorbing granite slabs with the use of environmentally friendly technological solutions. This product will be installed primarily on public buildings, includi...

The implementation of an innovative and environmentally friendly technology of renovation and reuse of damaged wooden pallets.

Brandbox sells and repairs wooden pallets for moving and storing goods. Our intention in the project was to recycle instead of disposing of damaged pallets. For this purpose we purchased and installed a complex, robotised pallet renovation line, consisting of: an automatic assembly line connecting elements which had previously been dismantled from regenerated pallets, a dismantling stand for damag...

Increased competitiveness of KONSTALBUD S.C. through innovative investments in environmentally friendly steel structures technologies

Konstalbud specialises in metal processing, manufacturing of metal components and trade in steel products. Owing to cooperation with companies from telecom and energy-related sectors, and with R&D institutions, our company has become the only Polish manufacturer of specialist large-size metal drums and reels in the sector of environmentally-friendly technologies (RES). The project involves the con...

The use of an innovative, environmentally friendly technology of fast, multicolour, high-volume printing to improve the company's competitiveness.

READ ME provides printing production services that consist in printing and binding of books, brochures, photo albums, calendars, and magazines, and publication distribution. We had long been considering an investment which would shorten lead times, increase product quality and lower the final product price due to cost reduction. The printing market is increasingly demanding in terms of innovativen...

Increasing the company's competitiveness with the use of environmentally friendly technological solutions through the implementation of an innovative product, i.e. wemDeck ISD hatch - as a result of R&D works in Wemeco Poland sp. z o.o.

Wemeco specializes in lot manufacturing of metal products for industry and road infrastructure, such as hatches, manholes or steps and stairs. Under the project we have implemented an original product innovation resulting from our own R&D work. It is the wemDeck ISD hatch to be used in roads and their shoulders, and parking areas. The innovative technological solutions applied in this new type...

Implementation of an innovative technological process of preparing the raw material for furniture production with simultaneous waste recycling

Drewdom is the only Polish manufacturer of furniture made of alder wood - the offer includes children’s, bedroom, dining room, bathroom and office furniture. The project results from the need to automate the production process in the company and to reduce a large amount of technological waste, which currently constitutes approximately 30% of the processed wood mass.  Its aim is to implement a new ...

Increasing the company’s competitiveness through the introduction to production of environmentally friendly fencing panels manufactured from recyclable materials.

The most rapidly developing branch of the construction market is ecological construction. Ecological building materials have emerged as a response to the need for environmentally friendly solutions. Our project introduces the results of Expo-Drew's own research and development work, i.e. ecological fencing panels made of waste materials, which are innovative on the national scale. The panels are m...

Marketing an innovative, monoproteinaceous, grain-free dog feed which prevents the occurrence of dilated cardiomyopathy

BRAWO sells ready-made pet food, mainly via the Internet. Rapidly growing sales revenues allowed us to plan the launch of our own pet food brand. The product will target the niche market of ready-made functional food for dogs under the name CardioBrawo. It will be the first super-premium product on the market that prevents the increasingly common worldwide problem of dilated cardiomyopathy in dogs...

Development and implementation of innovative environmentally friendly technologies, improving material management and using renewable energy sources in the Polimarky company.

Polimarky manufactures modified thermoplastic compounds which are mainly used in the production of cables and electrical wires. This activity is closely linked to the project in which we are developing a technology for the production of halogen-free compounds. They will be made of the so-called recyclate, i.e. plastics and other materials obtained from the secondary market (80% of the composition)...

Implementation of a process innovation in the form of a platform for qualitative and dimensional classification of wood.

In a wood processing plant, the manipulation of round wood is performed in order to obtain raw material of appropriate lengths, eliminate excessive curvature and remove defects blocking further processing. The process currently used at our plant is not very efficient in terms of quality and energy. Therefore, the aim of the project is to introduce a special line for quality manipulation of wood, w...

Purchase of new equipment to decrease energy consumption of the production process

OW-Plast manufactures plastic frames for lipsticks, which are supplied to cosmetics producers, mostly abroad of Poland. The main project objective was to reduce energy intensity of the frames production, as well as to reduce material waste generated in the process of manufacturing. As much as 31% of the moulded plastic was wasted in the production process before the project implementation. That p...

Implementing an innovative technology of secondary use of materials through effective recycling in situ in railway infrastructure development

Our company carries out technological projects in road and drainage construction. We perform embankment reconstructions at railway viaducts, bridges and in places which are difficult to access. A major problem in old railway lines reconstruction is adapting existing earth structures and bridges to the required parameters without the need to demolish them. Moreover, new regulations have rendered th...

Increasing the competitiveness of PLAST-FARB by development and implementation of an innovative SAFE HYBRID technological line

PLAST-FARB is a manufacturer of plastic packaging sold to 32 countries worldwide, such as envelopes and courier bags, security and sealing tapes, carrier bags and sacks. The project resulted from the company's orientation towards sustainable development and the search for solutions that neutralize our environmental impact, including product biodegradability. Under the project we have implemented a...

Strengthening the competitive potential of INOX-STEEL spółka cywilna Mariusz Gagatek, Sylwester Stalmach by implementing new production solutions

INOX-STEEL which manufactures steel elements used in industry, construction, architecture, interior design and other sectors, faces customers’ expectations regarding complex production of conically bent elements which we cannot manufacture due to a lack of specialist equipment. At the same time, sheet metal forming is one of the most common processes carried out for industrial purposes, so the nee...

BRAMY - SERWIS Dariusz Kaszkowiak

We are one of the few companies in Poland to offer servicing automatic gates and regeneration of gate controllers in industrial plants, which involves the repair of broken gate parts and prolonging the life of existing gates. The aim of the project was to introduce new services of express repair of industrial gates and repair of high-speed gate controllers, which we combined with the construction ...

EcoBrewery - diversification of production through the marketing of new organic products.

The bio food market in blooming in Poland, and last year we noted a 20% rise in inquiries related to organic beer. We are a craft brewery called Browar Maryensztadt, and our EcoBrewery project aims at launching five organic product lines, and making the production processes more environment-friendly. The project will make us the first craft brewery in Poland to introduce products certified with “E...

Increase in competitiveness of the printing house DRUKARNIA AMICUS Klaudiusz Nadolny through the use of green industry innovation solutions.

The aim of the project is to use in the AMICUS printing house a hybrid "narrow web" label printing technology combining toner digital printing, UV LED flexo and rotary finishing. Thanks to this technology we will offer a new product in the form of personalised and multi-variant roll labels, including biodegradable labels requiring additional finishing in a single pass. This product will be the res...

Implementation of a process innovation - an original technology of production of wooden pallets in PPHU DREWMAR ZBIGNIEW JANGAS

The growing demand for wooden components including pallets for international transport makes Drewmar, which manufactures wood products for many industries, bound to keep introducing new production technologies. The project objective is to implement our own comprehensive technology for the production of wooden pallets, which will allow for cutting medium and large-sized wood and use innovative band...

Implementing an innovative process of waste reduction in the form of processing of mixed scrap metal wastes including electronic wastes.

The market of vehicle recycling, purchase of scrap metal and its processing into feedstock, in which we operate, has a great potential due to the current economic and social trends. It fits directly into the UE horizontal policy on environment protection - European Parliament and Council Directive 2000/53/WE on end-of life vehicles requires that 95% of the mass of the vehicle should be recycled. ...

Implementing an innovative technology of secondary use of materials through effective recycling in situ in railway infrastructure development.

Our company carries out technological projects for road and drainage construction. We perform embankment reconstruction at railway viaducts, bridges and in places which are difficult to access. A major problem in old railway lines reconstruction is adapting existing earth structures and bridges to the required parameters without the need to demolish them. The project will implement an improved rai...

Implementation of an innovative technological process of preparing the raw material for furniture production with simultaneous waste recycling

Drewdom is the only Polish manufacturer of furniture made of alder wood. The project stems from the company’s need to automate its production process and to reduce the large amount of technological waste which reaches 30% of the processed wood mass. Under the project we implemented a new technological process of wood preparation for furniture production, and introduced a new product of wood chips ...

Implementing an innovative technology of corrosion protection in the production of steel structures.

Buyers of steel structures exposed to environmental factors, such as industrial halls and warehouses, are looking for products that will not require refurbishment for as long as possible during their service life. The main factor affecting the service life of a structure is the reduction of oxidation of iron exposed to external agents, i.e. protection of the structure from corrosion. We have there...

Implementation of an innovative SKY LIGHT window and an original technology of cutting glazing beads with the use of environmentally friendly technological solutions

The main area of Tradycja’s long-standing activity is the production of high-quality PVC windows and doors as well as aluminium joinery. This project will facilitate the market launch of our SKY LIGHT window - an innovation on the national scale: it will have the best heat transfer coefficient of 0.68 W/m2K and no need for steel reinforcement. We will also introduce a new glazing bead cutting tech...

Implementing innovative solutions with the use of environmentally friendly technologies as a chance for improving competitiveness of JEVEN company

Jeven offers kitchen extractor hood and ventilation systems, mainly targeting the restaurants of four- and five-star hotels. It is crucial for restaurant owners that the unpleasant smell of fat does not penetrate into the restaurant room. The smells perceived by the clients often affect their decision to revisit the places. The project aims to commercialise an innovative cyclone filter able to rem...

Implementation of the modern technology of automatic sorting of municipal selective waste, with the aim of achieving the recycling level required in Poland in 2020-2025

Ekombud collects municipal, industrial, construction, packaging and other waste in two voivodeships. We had not handled waste sorting before the project was implemented, but – having noted a significant increase of revenues from waste management, we saw a huge economic potential in waste processing. By implementing a separation and treatment process of municipal waste from selective collection und...

Launch of new/environmental packaging by Menos

Menos specializes in the production of packaging of corrugated cardboard. Such packaging matches the current circular economy trends as the cardboard can be recycled several times. We wish to proceed down the ecological path and introduce two new types of packaging under the project. The first type is packaging coated with a barrier hydrophobic layer and can replace multi-layer packaging used in t...

Offering a comprehensive, innovative and ecological regeneration service for turbochargers and DPF / FAP filters on the market.

For 10 years we have specialized in the regeneration of turbocompressors for passenger cars, trucks, construction and agricultural machinery. The need for this project arises from the trends that are radically changing the turbocompressor regeneration market: miniaturization of elements (downsizing), increasing their speed, decreasing engine capacity, use of turbines for petrol engines, use of ele...

Ecological modernization of the production process

We manufacture busbars for modular single-phase low-voltage apparatus which are used as elements of electrical devices and installations, mainly by companies producing electrical installation equipment and electrical safety devices. The aim of the project is to modernise our production process, and applying environment-friendly solutions at the same time. ELKAT has developed a PVC extrusion techno...

Implementing environmentally friendly technologies in PROTECH company on the basis of product and process innovations

The serious global air pollution resulted in a very strong tendency in Europe to limit the use of fossil fuel and promote heating systems that use renewable resources, such as biomass. The Protech project supports this trend by developing a new condensing pellet boiler with a capacity of 140 kW, the largest of the pellet boilers we produce. The new product will be intended to heat large buildings ...

Marketing an innovative, monoproteinaceous, grain-free dog feed which prevents the occurrence of dilated cardiomyopathy.

BRAWO sells ready-made pet food. Under the project we launched our own pet food brand, offering dry and wet pet food. CardioBrawo is innovative monoprotein, grain-free feed for dogs which responds to the animal health problems appearing on the market with the growing use of monoprotein feeds. The new feed prevents the increasingly common worldwide problem of dilated cardiomyopathy in dogs - a hear...

Implementation of WarmHive technology and equipment for the treatment of varroasis in bees

One of the important pathogens destroying bee colonies is the "Varroa" mite. The project implemented by ABERIT in response to this challenge will create a bee treatment technology and a bee treatment device. The whole system will operate under the brand name "WarmHive". It will be a system based on the proven phenomenon of heating up the hive with the natural light, which will make it possible to ...

Implementation of an ecological automated process for processing flexographic forms

PolimerPro designs and manufactures flexographic polymer moulds for flexographic printing houses. The project is an extension of the company's specialisation in making sets of photopolymer printing forms (matrices) to order. It aims to implement an automated process of washing out and processing photopolymer moulds which will provide high quality and repeatable images on printing forms. We will ma...

Increasing the company’s competitiveness through the introduction to production of environmentally friendly fencing panels manufactured from recyclable materials.

The most rapidly developing branch of the construction market is ecological construction. Ecological building materials had emerged in response to the need for solutions friendly to the environment and humans. Our project introduced the results of Expo-Drew's own research and development work, i.e. ecological fencing panels made of waste materials, which are innovative on the national scale. The p...

Introduction of an innovative drying process for biomass products in Bioeko Osnowo sp. z o.o.

BioEko Osnowo is a certified manufacturer of agro pellets and wood pellets which are manufactured from selected pine sawdust without any additives. The project was meant to combine the interests of environmentally conscious energy users with those of modern organic matter manufacturers, at the same time enhancing the quality and price efficiency of pellets. We have implemented an innovative proces...

A screwing set for the anchoring of light external constructions including overground photovoltaic constructions.

PGB sells construction fasteners of various types. We have noticed that there are no solutions on the market that would allow the fastening of lightweight outdoor constructions without harmful interference in the ground. Such interference is required for installations such as larger photovoltaic panels. Our project will implement an innovative solution of a screwing kit made of durable plastic for...

Implementing innovative services through the construction of new pro-ecological headquarters of BRAMY - SERWIS Dariusz Kaszkowiak, and the purchase of essential technical equipment

We are one of the few companies in Poland to offer servicing automatic gates and regeneration of gate controllers in industrial plants, which involves the repair of broken gate parts and prolonging the life of existing gates. The aim of the project was to introduce new services of express repair of industrial gates and repair of high-speed gate controllers, which we combined with the construction ...

The use of highly active binders for soil stabilization in earthworks provided by the company

PIS specialises in the construction of water, sewage and gas systems, treatment plants, pumping stations and water intakes for logistics centres throughout Poland. Our clients are leading construction companies, which means that very high geotechnical parameters have to be met in our work, regarding: strength, bearing capacity and soil compaction. Under the project we have implement innovative sol...

Innovative services of programming for Industry 4.0 based on ecological technological solutions.

KBA Automatic operates in the line of industrial automation, providing services of PLC programming, installation of industrial machinery, equipment and supplies. As a result of the project, our company will offer innovative services of robotic production line programming for Industry 4.0. We will use industrial robots and new generation controllers to optimise automated processes. Development work...

Increasing the company's competitiveness by the introduction of a new product (pellets) and improvement of existing products as a result of innovative environmentally friendly technologies.

FORENDA operates in the wood processing industry. The project objective is to introduce a new process of vacuum drying of wood, which will help us achieve higher quality of wood products and to expand our customer base beyond the construction industry, targeting manufacturers of furniture and finishing components. In addition, we plan to launch pellet production in response to the high market inte...

Implementation of innovative solutions in manufactured machines by introducing a new technological process regarding cutting and bending elements constituting individual components of manufactured machines.

We specialise in manufacturing machines for the woodworking industry. The processes implemented as part of the project will allow us to carry out many new operations and thus produce machines that we have not been able to manufacture before due to technological shortages. We have not been able to implement many of the innovative solutions that have been developed within our design team without a h...